Huffy 16 In. Girls Dora The Explorer Single Speed Bike "problems brake adjustment" Questions

Rear brakes misaligned I've tried to align my rear center pull brakes but one side is touching the wheel while the other is about 1/2 " off. How do I get both brakes to be equal on both sides? One ...

...brake, by loosening the anchor bolt, pull the cable tight, then retighten the anchor bolt. Gears: 2- This is also an adjuster barrel adjustment. With the rear wheel propped up so you can turn the ...

I am having problems adjusting a pair of Shimano XT center-pull cantilever brakes. Do you know where I can get a manual for these? www.shimano.com has detailed basic manuals for all their components. ...

How do you adjust the brakes when assembling ? One side tightens up quicker than the other. Can't get them adjusted evenly if you are having a problem with the brakes,then you need to get control over

...desciption) a round metal "plug" on the end of the brake cable where it attacheds to the lever. it hooks into the lever and there should be an adjustment further down to the caliper to adjust

...wires were rusted on the inside of the protective tubing. Either this, or the brake pads are no good. You can fix both problems by taking the bike apart and replacing the wires and/or the brake

Bike brakes frozen. Brakes are clamped on to tires, attempts to move them using hand brakes unsuccessful. Front and back tires do not move. I was not riding the bike when this happened; discovered the

the right pad on the back hand brake is rubbing. One side of a center-pull brake can be adjusted by tightening or loosening the cable itself (the side with a screw holding the cable in place) The ...

brake problems, i have v brake set up on my bike, giant, rock, brake pads are good, but the braks are are not so good and i am not sure how to adjust them can you help, chris Everything from the ...

I HAVE A ROAD BIKE SHIMANO 7 GEARS WHAT IS THE BEST WAY TO ADJUST THE FRONT MECH SO THAT I CAN **** TO THE BIG CHAINRING AND ALSO TO THE SMALL CHAINRING. MY SECOND QUESTION IS ABOUT THE SHIMANO MECH ...