Schwinn Mesa Gs Mountain Bike "crank arm tool bicycle" Questions

Ad

...crank arm and look for results from sheldonbrown.com and parktool.com first. They are the most accurate and complete sites in my experience. Better yet, if you have a bike co-op/kitchen locally go to ...

Ad

crank arm is stripped on the left side of the bike the crank arm is stripped on the left side and the pedal falls off. Is there a suggested approach to repair/replace the crank arm? Yes, the crank-arm

Ad

...crank arm extractor to pull the crank arm off. However it's important to know why you are removing the crank arm. There are other specialized tools necessary to do anything with the crank bearings, ...

Question about Genesis Cycling

1 Answer

...crank (the arm the pedal is attached to), you'll need a special tool. I got mine at a bike shop. (Bike shops are our friends.) I use the Park Tools CWP-7. It's pretty much a big bolt with a smaller ...

Question about Mongoose Cycling

1 Answer

...crank arm are striped,recieved new one from manufacture but can't take of cramk arm even after removing arm locknut,is there special wrench to remove crank arm?Didn't even attemped to try ...

Question about Diamondback Cycling

1 Answer

...crank arm (or two). The axle (which you cannot see) has square ends (about 1/2 inch) that are tapered toward the end (just a little smaller). The cranks have correspondingly tapered square holes. You ...

Question about Schwinn Cycling

1 Answer

...I get them off? To remove 3 piece crank arms you will need a special tool called (fittingly) a crank puller. It threads into the arm and a center "bolt" torques into the spindle and pulls the arm

Question about Specialized Cycling

1 Answer

the pedal hole on the drive side crank arm is stripped - what can I do You will have to replace the crank arm and chainwheel. If, you don't have the tools it will be cheaper to have your dealer do it.

...a can of wd40 and spray leave to soak in then acquire two screwdrivers and put them round crank arm and knock them both with a hammer at the same time. (you may need two people) then should come off

Question about Cycling

2 Answers

...bicycle crank Special tools are required to remove the bearing keepers on the crank. Pullers designed for the pedal arms are needed too. You can get these tools here: Bicycle Crankset Tools Mount or ...

Not finding what you are looking for?
Schwinn Mesa Gs Mountain Bike Logo

35 questions posted

Ask a Question

Usually answered in minutes!

Top Schwinn Cycling Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

vince

Level 3 Expert

2530 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Schwinn Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...