Schwinn Mesa Gs Mountain Bike "brake cables" Questions

brake cables not connected to brake levers on handle bars Brake cables have a knob on the end of them, that knob fits into the brake lever. A great web site for more information is "Sheltonbrown.com".

...brake cables to the brake level how do i install brake cables? Go here and look through the video's. There should be something for installing brake cables. Your install will depend on what type of ...

Bicycles Brakes Tightening I think my bicycle brakes need tightening, how do I tighten my bicycles brakes? Are the brakes center pull or side pull? Center pull would have a nut directly in the center ...

how to adjust disc brakes on a mountain bike brake lever soft Most disc brakes are the same as other brakes. The cable comes down to the brake. When you pull on the cable, the shoes tighten on the ...

Brake assembly How do you attach the brake cable to the handle bar grip? The knob at the end of the cable is not fitting in to the slotted screw on the handle bar. The part of the brake on the wheel ...

...the housing in most cases. For the shift cables this is not a problem, however, for the brake cables you will have to untape the bars to access the housing. I hope this anwsers your question. Thank ...

the hand brake on the schwinn won't bounce back after squeezed. which causes the tires not to roll smoothly. can you help More than likely the problem is on the brake or the brake cable. ...

the brakes will no tighten up on the wheel You have to adjust the break cable.. Loosen the little nut that hols the cable at the break.. Pull the cable out a little bit with pliers.. Tighten the nut ...

back brake wire is loose how can we tighten it? (360 degrees brakes) Loosen the screw on the brake (usually an allen wrench) where the cable goes through. As you loosen the cable will come loose. Pull

Rear brake not releasing I'm assuming these are rim brakes and not disk brakes. A couple things can cause this, first check to make sure the wheel is true and the rim isn't rubbing on the brakes as it