Kenmore 35912 / 35913 Progressive Upright Vacuum "clear clog" Questions

...will usually clear a clog from the hose. If the clog is in the power head (base), you can usually access it from the top side of the swivel neck or the orange access door on the bottom of the

...clog and possibly clear it completely. If not use an air hose or shop vacuum exhaust to blow the clog out. Borrow one if necessary. Check inside intake for a clog between hole and filter. If it's ...

...by disconnecting the wand. Use the handle of a table knife to try to push the clog back through the power nozzle, toward the brush. If that doesn't work, try using long nosed pliers to clear the

...a coin in. Lift end of hose so that the coin drops out. If it doesn't there's a clog that needs cleared. You may be able to do this by attaching the hose to the blower hole, placing the other end ...

...clog that way. 3. Short hose in power head. This may take a little time, but you should be able to clear it. For 1 and 2, do not use sharp or pointy objects to try to clear. This may result in tears ...

...clear, but there was a clog up inside the vacuum between the inlet at the beater bar and the lower hole that empties into the canister(very hard to find). Use a wire hanger to clear it out. just ...

...have any suction on my vaccum There is a clog in your hose. You may have to do some disassemble to clear it out ... If you have a ship-vac, it may help you clear the clog. Thanks for your visit

clear the clog. Take apart the hoses for the motor base and the floor attachment and make sure it is clear. Most likely it is clogged up near the top going into the vacuum handle /power head assembly.

...clear the clog in the hose ... I am 51% sure your hose is clogged between the dirt collection port and the dirt deposit outlet. You may have to remove some parts to INSURE the hose is clear. thanks ...

clear hose clogged The clear hose is clogged, I can't seem to get that part of the hose unattached this link below is for the manual it will give you full instructions how to unatach all the ...