...vacuum will no longer self-propell while vacuuming the carpet. The suction works and the brushes rotate. How do I get the vacuum to self-propell itself again? There may also be a reset button. If the ...
...Self-propel no longer works. I have checked/replaced both belts. I was wondering if there is a cable going from the ,Self-propel button (on the handle) down to the wheel drive. If so, is this a job ...
be loose and the self propelled function no longer seems to be functioning handle is suppose to be a little loose. s.p. function not working, try changing the flat belt p# 38528035 or pk # 40201170 (2
My Kirby won't kick into gear. No longer self-propelled her2 not a drive kirby
...longer engage the self-propelled mechanism. In order to verify this, simply make sure that the machine is set to the Carpet setting, turn the machine on, and turn it over on it's side with the handle ...
...was pushed ON and Off a couple of times, the vacuum will no longer turn off unless it is unplugged. These switches go bad, best to just replace it. Could have a problem with the rod inside the
...self propell does not work... i turned it over and took off th bottom plate and can see where the cable is suppose to be attached to the drive system, but it is no longer atteached, so it came out or ...
...self-propelled Hoover Wind Tunnel" it's part number 43143046. There's a very good video; hopet I'm allowed to post the link here. https://youtu.be/K722IsUxjYM When new belts don't fix the problem of ...
vacuum cleaner self-propel? Belts are fine and all has been cleaned. Any suggestions on how to attach the cable properly? The flat belt should be changed if it has been longer than 9-12 months. Next I
...vacuum. The problem is that the brushes are no longer rotating on their own. They only 'brush and lift carpet' when I pull backward. I have ahd the vacuum for about 1 year. what do you think is the ...
184 questions posted
Usually answered in minutes!
234 Questions
108 Questions
103 Questions
106 Questions
53 Questions
