...bearings to their proper position and install the beater bar. Replace the cover plate. Best regards, --W/D-- most people dont know that there is a micro switch under the right side cover on upright ...
...Dirt Devil beater bars have sorta-sealed bearings that burn out once wear puts enough particles in the works, and you'd have to replace and reseal bearings in there if you did get it open
Question about Bissell Vacuums
...beater bar and the fittings and out of the bearings. Check to make sure that the roller bearings spin freely. If they do not spin freely, put some rubbing alcohol in the bearing (you can pour it onto ...
...of the bearings are completely dry and no oil drips out of them (don't want the oil to attract dirt). You'll probably need to replace the belt. Reassemble the machine and it should work for
...beater bar & replacing, checking the belt, and checking the hoses for clogs, the machine still has weak to no suction & gives off a foul odor (similar to a slipped, burning belt). could possibly be a ...
replace the beater bar? I replaced the belt but now it seems too tight and the bar doesn't want to spin. The belt is supposed to be tight, but the beater bar bearings are probably full of string, hair
...bearings lightly with 3-1 oil or similar, then reinstall the bar. Test the running on your carpet--if it seems to stall the bar, replace the belt as well. Hope this helps! one thing to check is -- on ...
...bearings from the ends. Clean both the bar pins and the bearing blocks. Lightly oil the bearing blocks with 3-1 or similar light oil. Assemble the bar again and check movement. If ok, reinstall the ...
Question about Rainbow Vacuums
...with your finger. If the do not turn have them replaced so they won't cause further damage. Check the bearings on beater bar. Try turning with your finger. If they are locked up beater bar won't
...bearings are. Disconnect belt and see if the beater bar drum turns freely. If not, clean off the strings, hair, etc. as Gary Brooks indicated. And if it still doesn't turn easily, the bearings could ...
5 questions posted
Usually answered in minutes!
234 Questions
128 Questions
108 Questions
103 Questions
106 Questions