Question about Bissell Vacuums
...foot pedal on my Bissell 3760-4 Replacing the upright locking foot pedal on a Bissell 3760-4 is a fairly straightforward process. Here are the steps you can follow: Turn off and unplug the vacuum ...
foot pedal for a pfaff creative 1475CD sewing machine. I was gifven the machine, but the foot pedal was missing. Do you have any idea where I can get one? Any help would be gratefullu accepted. Please
...foot pedal release on riccar 8800 series I purchased the foot pedal release. How is the spring positioned in the housing. Thank you, It's not hard to do but is almost impossible to explain how to do ...
foot pedal won't lock in place It stands on its on but if you lift the vacuum the foot pedal falls Latch/clip worn or failed Shark vacuum cleaners don't use foot pedals. The head unit will fall to the
Question about Samsung Vacuums
foot pedal side near a rear wheel. Operate the pedal to see how it is held in place by a moulded pin which is captured by two lugs on the underside of the body. Use a torch to get some light in there.
foot pedal riccar 8850 Remove the assembly that holds the foot pedal by removing the three screws after you've removed the bottom plate and brush roll. This allows you to get the nozzle housing out of
foot pedal on my Kenmore 116-31912100 stays in down position like a spring is broken. And it probably is. Access the part & replace. The plastic tab on the foot pedal that acted as a return spring
...foot pedal. I thought it might be the pedal, so I ordered one on-line, but the new one does not make it work either. I have checked the needle and it is fine, not loose or broken. The presser foot is ...
Question about SewShop.com Vacuums
...foot pedal cord, plus a pressure foot, for a scholastic 6510 We need every thing, cord from the wall,to the foot pedal, to the machine. Also need a new pressure pedal.We are presently in Brownsville ...
The pedal on my hoover is stuck I have to pull the pedal manually with my hand I cant use my foot it ia Your foot pedal is likely not snapped on to the axle assembly all of the way.
153 questions posted
Usually answered in minutes!
234 Questions
128 Questions
108 Questions
103 Questions
53 Questions