Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum "vacuum connection pipe" Questions

...pipe is clogged so anything that i vacuum up through the wand gets stuck. I need to clear it out but the pipe doesn't come apart. There sould be a rubber flap under the pipe.Pull it down to remove ...

...the unit is blowing instead of sucking, There must be a pipe that is connected to the wrong outlet. Feel where there is suction instead of pressure, that is where your vacuum pipe must be

...pipe at the bottom of your vacuum cleaner, between the part where to get suction and the part you don't. Use a torch if nessary and a stick etc... to remove whatever is stuck in there. Take care! ...

Bag change indicater staying on and vacuum smells hot when using I have a Hoover windtunnel bagged upright. The bag filter change indicater is staying on after I changed the bag. It starts smelling ...

...connection screws at the back of the inlet screws fully where the wires connect as they contain a spring loaded terminal which may fall apart. If you have no suction, the piping has either not been ...

...pipe? I need to replace power connection plug (cover) in extension pipe. How do I disassemble the cover? Google and order part 8175251 from major department store parts direct site. Must be handy to ...

...vacuum system. This pipe can crack and loss of suction occurs when using it upright. The pipe can be repaired temporarily with strong fabric sticky backed tape (e.g. carpet seal tape). A new pipe can ...

...connection. If the bottom flexes but there is no section at the inlet there is an obstruction in the pipes witin the vacuum unit. A stiff wire with a hook bent at the end is usually sufficient for ...

vacuum I have is probably from 1993/4. It has one exhaust pipe and two inlet pipes. It was initially under my stairs. I would like to move it and have in fact moved it to the garage but am now fitting

...connection between your new trap and vacuum are air-tight, but IMHO this adds a little adventure to the project... you want something easy to attach and remove, and by no means do you want to do ...