Kenmore 23313 Whispertone Bagged Canister Vacuum "roller bar turn" Questions

roller bar and motor assembly area.Place one end of the belt over the steel shaft of the motor and then roll the other end of the belt on to the end of the roller bar.placing the belt on the

...roller bar sits their should be a clear plastic tube check this tube is free of dirt. Check around inside the carrage for hair string etc. Check belt for breaks and swelling in the rubber pull ont ...

...the vacuum. If necessary, slip the belt over the motor shaft and then slide the roller undre the belt. Install the beater bar back in the sockets and replace the base plate. Best regards,

...roller bar I have a DC 17 Animal vacuum - a small bag was caught in the roller bar and now it is making a loud knocking noise when the roller bar is engaged. The noise does not happen when the vacuum ...

roller bar (barush bar) does not turn Same problem, vacuum has excellent suction and I can turn the roller (brush) bar with my hand but it will not turn with vacuum is on and in the cleaning positioin

...bar/brush will not damage the wood. You may find these troubleshooting steps helpful: (Quote) If something gets caught in the brush roll, the overload protector shuts off the roller. Lie the vacuum ...

...roller bar was engaged and I took it to a repair shop and they said it was the roller bar itself. The shop replaced the part and it worked fine for a couple of months and then it started to make the ...

...Bar". Hoovers have brush rollers and are easy to replace. Turn the machine over and remove the 4 screws which hold the cover on, over the brush. Remove the brush roller. Slide the new roller through ...

...roller turn and it won't pickup anything. The smell is probably a rubber drive belt slipping on the bar. Sounds like it needs a thorough cleaning. Look on the bottom of the machine for a way to open ...

bar" (or brush roller) not rotating is a broken belt. The number two cause of brushes not rotating is that something is jammed & wound around the roller, preventing it from rotating. For the belt: