Kenmore 23313 Whispertone Bagged Canister Vacuum "head" Questions

Power head and wand connection is intermittent. Tried to take the power head apart by removing the 3 screws on the one side of the power head. Was not able to pull the sections apart and since they ...

The extra large mop head attachment will not release steam. It seems to be clogged, and the steam escapes above the head attachment. How can this be resolved? Hi, I saw this post, so I had to go and ...

I think the belt is off or broken in the cleaning head, but need to get it apart and don't know how It appears to be the same cleaning head on my model # 116, if so, there are two phillips screws ...

My dyson dc 25 power head has short, will work with pressure forward with handle only. Will new head fix problem A new head may solve it...but it may not. It could be the connection between the head ...

how do i remove the head to check for a blockage Press the foot pedal to raise the head to the highest setting. Turn the lever on the head to "off" to remove the belt from the motor shaft. Pull head ...

My S7210 vacuum has great suction at the hose but not the head the brushes spin fine. I have cleaned every filter I can find no luck at head There is a short internal hose that goes from brush head to

head pops off when steam builds up on my Shark mop When filled and plugged in and scub buttton is pressed, the head pops off spilling steam. Has head been replaced recently? 1. Make certain head is ...

...steam mop not sending steam to attachment my mop is making steam but not sending it to the cleaning head. I took off the head and it practically flew across the room. So, how do I fix this problem of ...

why is my power head not working tried power head from same model and does not either You either have a broken power cable going to the head or your canister isn't supplying power to the head, or the ...

dyson animal brush head will not rotate on carpet brush head will not spin when on carpet. seems to lose suction. However when the brush head is removed it has a lot of suction. Brush head may need. ...