Kenmore 34720 Upright Vacuum "making loud noise" Questions

...making a very loud noise. any suggestions? When the motor bearings start to go bad, they will make a loud noise. Some motors if a piece broke off of the fan, then it also will make a loud noise. You ...

making-noise Aug 20, 2021 - Another cause behind the loud noises coming from your Shark vacuum is an overly dirty or damaged filter. Remember: air must be able to pass ... ?Loud Or High Pitch Noise ·

...making loud noise but picks up My Hoover is making a really loud noise. It does pick up. I have checked all filters and hoses. Emptied Hoover. The roller brush seems ok and not clogged with strands ...

...making loud noise My Dyson started making a loud noise like there was some obstruction near the roller. After cleaning thoroughly it still made the noise, I thought maybe it was slippage in the belt ...

loud noise. It hurts my ears. makes a terrible loud noise. It hurts my ears. time to check your filters if you bought it used check your hoses also some people think sunp pump hose is just like vacume

...unit still shaking badly and making very loud noise? Could be a broker motor retainer. There should be two motor retainers in this model, when one is borken, it causes the unit to shake and

...loud noise When new the motor ran quiet and now it makes a very loud noise when it runs Why? Depending on the age of the Rainbow, it could be the bearings. Does the noise happen with just the Rainbow ...

...making a loud noise as I clean carpets. What can I do? Carpet cleaner was working fine then all of a sudden it got loud. Seems to be working properly. I have checked both belts. Still makes the loud ...

...making loud noise Not sure if this will help but mine sometimes make a loud noise as well and its usually due to hairs stuck UNDER the belt in the motor area. Get some sharp skinny scissors and long ...

...loud noise like a grinding noise. Makes a loud noise like a grinding noise then smokes comes out and it smells like burning rubber? When I take the (rod) brush off with the belt then run the vacuum ...