Kenmore 53642 / 53644 Side by Side Refrigerator "ice forms maker chute" Questions


...chute The ice cubes form properly and are separate cubes in the bin. But when they go into the chute they apparently melt and refreeze, sticking together IN THE CHUTE and clogging the chute. The ...


Question about GE Refrigerators

1 Answer

...forms on bottom of ice maker. ice cubes unable to drop through chute because of this problem The dual water valve (solenoid) that open and let the water from the line when the ice maker calls for it, ...


Question about Frigidaire Refrigerators

1 Answer

...Ice crystals forming on Frozen items in the freezer is an indication of an air leak caused by either a bad seal leaking seal or an open door to the ice maker Ice chute door Appliance 911 Sea ...

Question about Hotpoint Refrigerators

1 Answer

ice maker was thawed out to correct this problem when first diagnosed. Have to manually close flapper after light goes out and flapper interlock releases. I am not sure but I think you have a bad door

...ICE MAKER fill... or temp) 2. Water service valve is NOT FUNCTIONING completely... allowing water to get past the VALVE. (replace the valve) 1. ICE CHUTE door is blocked by a cube/chip of ice... or ...

Question about Whirlpool Refrigerators

2 Answers maker, some frost is normal, but , lower temp in freezer The door flap which lets the ice thru the door , is not closing completely . This will cause frost on the upper portion of the shoot AND ...

Question about Whirlpool Refrigerators

1 Answer forming in freezer below fan on base and all around plastic chute in center back of freezer. Not from icemaker. How to get plastic chute out to see defrost drain, etc? use hair dryer but do it ... maker. For the past couple of months I have had the biggest problem with frost forming inside the freezer ONLY around the ice dispenser chute. Any suggestions on what it could be and if it is an ... maker still making ice. I first tried a suggested fix from this site to just leave dispenser light on overnight. I added some aluminum foil sealed over the module with a little tape to hold in ...

Question about KitchenAid Refrigerators

2 Answers

forms on the ice cube shoot and on the bottom of the ice maker. I frequently dump out all the cubes in the tray and clean out all the cubes in the storage bin and where the auger is. I also remove the

Not finding what you are looking for?
Kenmore 53642 / 53644 Side by Side Refrigerator Logo

733 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

Sal De

Level 3 Expert

2699 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Elie Balas

Level 2 Expert

170 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides