Kenmore 53642 / 53644 Side by Side Refrigerator "fridge hole drill" Questions

...hole in the side of the fridge to accommodate a 8mm diameter gas hose that will be linked from the keg inside the fridge to a carbon dioxide cylinder that will sit outside the fridge. The gas line is ...

...hole in the side of my westinghouse rj340m fridge . I want to put a ''BEER GAS LINE'' through the side of my fridge & am hoping not to hit an internal line or something else,thanks.. the most ...

...a hole in my 2009 fridgadare refridgerator to put a lock on it does the freeion line run on the side of a fridge? yes, you need to be very careful not to put a hole in the sealed system or it is ...

hole for beer gas line in side or back but cannot find a schematic. Is there anywhere to avoid? YES the evaporator sections ( most are in the back and some include in the sides as well) normal fridges

...fridge and it was slow coming out too. I have metal pipes under my house, so I had to drill the hole for the water line, could I have drilled the hole too small or something? I jsut replaced the ...

...drasticly. As an option i find it is alot less costly to drill a couple holes down the bottom of the cabinetry or on your flooring behind the fridge then replacing a whole compressor hope this ...

...anything that will break the fridge if I puncture it. Anyone? DO NOT DRILL!! There are lines in the side of you refrigerator that if punctured will turn you refrigerator from a cooler in to a

i want to switch the doors from left to the right side i have a fridge freezer on top of fridge, i want to move the doors from the left to the right? Hi, The parts are interchangeable (hinges & ...

reverse doors freezer hinge After reversing my fridge doors, the hinge under the freezer door sits up too high, causing the freezer door to sit up 1/4 inch + on the hinge side. The freezer door is ...

...fridge all hooked up, go back to the basement and turn off the water. Find the cold water pipe and drill a 1/4-inch hole to accommodate the copper tubing. Step 4 Attach valve to pipe. You need to ...