Kenmore 53642 / 53644 Side by Side Refrigerator "attach lock fridge" Questions

...the machine and attach to the door via a plastic quick connect, it is just a push lock connection. You may have to pull of the toe kick and the left hand end cap depending on the model to see

...kitchenAid side by side. The Freezer/Fridge are not getting cold. Opened it up. The fan is running. Attached to compressor is a unit (not the capacitor, I think it is the starter). I hear a click ... ...

Why does the water filter in Whirlpool Gold refrigerator make a loud noise when I depress the water? Remove the filter and reinsert with force.. Whirlpool Fridges have many styles, the more common one

...is super hot are the fan directly next to the compressor,did you notice if that fan was running? or attached to the side of the compressor covered by a plastic cover is a relay and overload,if you ...

...This normally is the case as the contacts are burnt out...' Have you made sure the arm or flap attached to the ice maker is down? this little arm tells the icemaker to start making ice, or stops ...

...fridge and wait a minute or two, plug it back in. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out ...

...lock you push together and then pull apart. 3. Once wires are disconnected removed the screw hold the door as this is the top hinge. 4. Lift the door and that door is removed 5. Repeat for the other ...

...to be changed it could be the relay that is bad, not properly starting the compressor. The relay is attached to the compressor where the wires go to it. Remove it, Shake it, If it sounds like little ...

...fridge near the bottom of the freezer side. There is a panel cover with a dozen or so screws holding it. One screw holds down a ground wire so keep note of that. Remove the panel and you will see a ...

...IT BUT FIRST DISCONNECT AND REMOVE BACK COVER AND RIGHT BY THE COMPRESSOR THERE IS A SMALL BOX ATTACHED TO IT CALL A OVERLOAD REMOVE IT AND SHAKE IT IS IF RATTLES THEN JUST REPLACE THAT PART IF ...