Kenmore 50522 / 50524 Side by Side Refrigerator "remove ice maker 106" Questions

Ad

Question about Kenmore Refrigerators

2 Answers

...Ice Maker Modle #106 56622500 I Kenmore Coldspot Ice Maker Modle #106 56622500 I removed my ice tray and now it will not dispense ice. It was working fine until then. Is there a certain way to put it ...

Ad

Question about KitchenAid Refrigerators

1 Answer

...remove your outside rear bottom panel; disconnect the 2 prong wires connected to your ice-maker water valve (blue with black solenoids) and check for continuity using an ohm-meter setting. If ...

Ad

...ice, but the motor did not turn the arm over to remove it from the tray. Here is one difference that I have noticed with the new part that I purchased: Old Part: 260W-115V-60HZ 106 626663 New Part: ...

ice maker, thawed it out to remove the cubes. re-installed the ice maker Same results. Hi caleycatz, It sounds like you are in need of a motor module for your icemaker. This is the motor and gear that

Question about Kenmore Refrigerators

1 Answer

...remove ice maker from unit? this unit has the ice mker up front / there is on the bottom side a scres 1/4 remove it . the on the l & r there is two plastic tabs pust them in and pull ise mker out ...

Question about Refrigerators

2 Answers

Ice Maker not making Ice this is a kenmore side-by-side about three years old (106.56549400). Ice maker not making ice. I replaced the water valve in the back and did not fix the problem. Water is ...

...remove the ice maker to visually inspect that tube. If blocked, it needs to be defrosted, but use caution. Too much heat too fast will start to melt plastic and vinyl parts you don't want melted. If ...

Question about Kenmore Refrigerators

1 Answer

...remove the ice maker to visually inspect that tube. If blocked, it needs to be defrosted, but use caution. Too much heat too fast will start to melt plastic and vinyl parts you don't want melted. If ...

Question about Kenmore Refrigerators

1 Answer

...top freezer model, so use above 106.....number yes you have to take off the ice maker then remove the scews, sometimes there is a air channel that has to be removed which are held in by plastic ...

Question about Kenmore Refrigerators

2 Answers

...ice maker, which was nicely tucked in the front kick panel, and everything worked fine. It went through the cycles but still no water comes out. I finally had to follow the trail back to the ...

Not finding what you are looking for?
Kenmore 50522 / 50524 Side by Side Refrigerator Logo

313 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Johnny 1000

Level 2 Expert

94 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...