Invicta Dragon Lupah 2093 Wrist Watch "crown problems" Questions

Invicta Lupah crown replacement? I lost the crown that sets the time for my Lupah and have a new one, but have now idea how to install it properly. Any suggestions would be greatly appreciated. If ...

...the time again, and it will run for 20 minutes and stopped. Any ideas ? My observation, when the crown is unscrewed into the winding position ( first position ), some times the crown will wind

...bought a used 37MM Cartier Pasha watch. Have no instructions on how to set time. When I unscrew the crown a little and try to pull the screw under-neath up it won't move. I'm afraid to tug too hard ...

...Day light savings toime ends this evening and the watch needs to be set back 1 hour. Unscrew the crown and then pull the crown out to the second click and turn. When done push the crown back in

...with hour hand but how? Here is how to correct the 0 Position for your watch. While your the crown of your watch is down in the starting position , turn the crown until the mode hand (this is ...

when truning crown to change date, the date stops moving HI, I am sort of new to automatic watches but I currently have a tagheuer aquaracer CAF2112, when the hour dial is stationed in between 9 PM ...

...stem of the watch can't be pushed back in so it is flush with the case, with no gaps. The winding crown is loose on the stem. Get the stem completely out of watch and while holding in vice or pair ...

...The steps are like this : 1. Pull the crown full, and turn it clockwise until you find the right day. 2. and then push it one click (dont ...

...got it back on(the crown) properly. You will have to take it to a watchmaker to be done correctly. I think your setting problems will go away once the crown is attached to the stem correctly, ...

When I pull the crown out to set the time on my Rolex Air King watch...once it is fully pulled out to the correct position when turning the crown, it is very tight or or difficult to turn the crown to