...fascia removed, you should see the circuit board and more of the ice and water mechanisms. That whole assembly came off for me with three screws, one electrical plug, and the water hose. From there, ...
...are good, it could be bad capacitors on the TV board. If you are comfortable with electronics, the service manual explains how to remove the TV fascia. From there, it is easy to get to the
...fascia away from the door and remove. Then remove the screws holding the control in place and disconnect any wiring. (Don't forget to pay close attention to WHERE the wires connect and HOW the wires ...
board, use a small flat blade screwdriver and remove the fascia panel starting at the bottom first. Just begin prying it gently off. Then remove the screws that are holding the board assy in place and
Question about Maytag Refrigerators
...board. It will be located just behind the dispenser fascia, mounted on a bracket. the actual light switch circuit is mounted on this board. Try this procedure:- Shutdown the unit for five minutes. ...
Question about Maytag Refrigerators
board, use a small flat blade screwdriver and remove the fascia panel starting at the bottom first. Just begin prying it gently off. Then remove the screws that are holding the board assy in place and
...fascia / radiant shield on. Then remove screws that mount the control housing to top of fridge, etc. I also removed two screws that mount the ADC to the plastic housing to get access to the ADC. ...
board. It will be located just behind the dispenser fascia, mounted on a bracket. the actual light switch circuit is mounted on this board. NOTE_ I would advise to shutdown this unit for five minutes.
49 questions posted
Usually answered in minutes!
1,239 Questions
824 Questions
623 Questions
625 Questions