Abit AS8-V Motherboard "uguru" Questions

uGuru and 64-bit Vista? I finished my build with an Abit IP35 Pro and and an intel dual core quad (6600). Everything went flawlessly!!! I have 64-bit Vista Ultimate, and the uGuru utility will not ...

Hard drive What hard drive should use with abit-a17 uguru motherboard u can use any hard drive seagate or samsung but u need to configure the hard drive

...it stops to 90 is a bios problem.I had a similar problem, mine hang at 90-after a complete check of uguru.In your case might also be the uguru chip.I hot flashed the bios.I used an abit nf7s 2.0 to ...

...no sound looking for 7 driver and LAN 10/100/1000 has Intel 925xe HD audio (onboard) looking for uguru disk with win-7 support.. or drivers try to download here ...

...to the manual I think it's getting all the way through. The final code is ''9.0.'' - ''Complete uGuru initial process. AWARD BIOS take over booting job''. I've tried resetting the CMOS both with ...

...fan failure. Check your fans, if they all look like they are running fine then go into the bios, uGuru page and check the fan monitoring settings. It may be set to monitor a fan that you don't

...I went to school came back power on the cpu and bam the computer start beeping like forever. The uguru pops up and say voltage 1.38 and then shutdown the computer. To avoid this i close the

Try to OC Cpu and get error in post screen. I try to OC my CPU thru either uGuru or in the BIOS and i get an error in post screen saying "Warning! System is now in safe mode." It tells me to reset the

My computer stopped working suddently. When I turn it on my abit uguru AI7 motherboard displays 8.3. then 0.3. and then 8.0. and that is it, I only ear a very low noice kind of siren and nothing else.

ABIT AN7 MAINBOARD HANGS @ POST CODE 90 STARTS FROM: 0.0. THEN 8.3. THEN HANGS @ 9.0. "Complete uGuru intitial process AWARD BIOS take over booting job" and then anything else happens please help I ...