...steam valve. Have you turned the steam valve off tightly and cracked the knob inside allowing it to turn on the brass spindle.Try pulling the knob off and turning the spindle with a pair of pliers or ...
Question about Saeco Coffee Makers & Espresso Machines
steam valve and can't make espresso I steamed some milk and then tried to brew espresso. Now the espresso portion won't work. When I try to brew espresso, water shoots out of the steaming wand and
...steam valve is opened. I found on my own machine that as it got older, the switch and valve fell out of adjustment. The plastic knob could rotate the switch on, but not open the steam valve to allow ...
Question about Gaggia Coffee Makers & Espresso Machines
...it heats the water for steam. The steam valve tap rod needs to be replaced, or check machine if it has a plastic steam valve, Gaggia designed a new Stainless steel steam valve for the compact
Question about Rancilio Coffee Makers & Espresso Machines
...steam valve wand but you don't need to. The rubber grommet inside the steam valve is worn out and the tap wont close properly - that is why the steam is coming out. You will find these parts with a ...
...steam valve is the problem, there are a little pin in the steam valve that can hang up. Try to descale your machine and see if that help. If descaling fails you will need to dismantle the steam valve ...
Question about Gaggia Coffee Makers & Espresso Machines
steam valve wont turn off - need new steam valve I have a gaggia titanium and when I turn the steam knob off there is still steam coming out. I have read other similar problems on this site and I ...
Steam Valve: The steam valve might be worn or malfunctioning, preventing proper steam flow. If the steam valve is not functioning as it should, it might need to be repaired or replaced. Boiler Heating
Question about Krups Coffee Makers & Espresso Machines
...steam wand, even through the dial is set at no steam. The steam valve is not closing. In such a case water finds an east exit from the machine where there is no back pressure. Repair the steam
steam valve. It is not very hard to do and you can find a new valve with a Google search. It is possible to attempt a repair but it is as hard to just replace the valve and repaired valve usually leak
215 questions posted
Usually answered in minutes!
440 Questions
417 Questions
393 Questions
348 Questions
266 Questions