Kenmore 21.0 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker "ice flap opening maker door" Questions

...flap & ice falls into cup. What is part pulls door open?? The description says you have an LG fridge? I may need the entire model # from the sticker inside the fridge to tell for sure, but there is a ...

flap open, the ice will fall into my cup, and the flap will spring back to closed position. But for some reason the flap is no longer opening freely on its own. I always thought the flap opened simply

ice door (flap) to open for single slices? It just dumps until I release and then 32 OZ of ice pours out. Yes, the ice/water unit can be removed from the door to give access to the switch and solenoid

...still press the lever and get cold water. You need a service guy to look at it. It could be water leaking or a simple case that the flap isnt sealing and the ice melts and then freezes the flap ...

...ice door flap open when you pull the glass out the flap stays open dropping ice all over. This doesn't happen every time you get ice. Is the clear plastic funnel part supposed to retract? The plastic ...

ice down the chute. The flap door doesn't open and causes ice to jam up in the chute. Any ideas? The flap dood is on a spring assembly...I cleaned the door and checked for blockage, sticking and could

...ice maker flap keeps opening like it was possessed my maytag side by side stainless steel refrigeraotrs ice maker flap keeps opening like it was possessed If the flap your mentioning is the one that ...

...flap that lets the ice out is shutting properly. When warm air enters the freezer door, it condensates then water freezes forming your ice. If this is your problem, they make a kit that replaces it. ...

...door The ice maker works fine but when you try to get ice from the door the flapper valve does not open and let the ice out check that some melted ice or water has got on the flap and frozen it

flap is probably not closing properly. Dispense some ice, then open the freezer door and look to see if the flap is still slightly open. If so, you will have to take the front cover off of the control