Kenmore 73262 / 73264 / 73269 Top Freezer Refrigerator "refrigerator cap tube replacement" Questions

...cap tube you will have to do the following. Purchase cap tube replacement from supplier. Recover your refrigerant. Use your torch to remove the cap tube. Weld in new cap tube (make sure you have it ...

...cap tube must be cleared for the unit to cool properly and to allow enough cool refrigerant to return to the compressor to keep it cool. I have heard from a fellow technician recently who tells me ...

...REFRIGERATOR ? First , install a clamp on access valve on the compressor assecc tube . This is usually the 3/8 " , short tube , mounted on the compressor . Next , connect a refrigerant reclaimer with ...

...refrigerator low side with liquid , only gas . The high side can be charged with liquid . ) A cap tube separation , is when the pressurized ( causes heat ) cap tube , becomes separated from the low ...

cap tube...the refrigerant is not getting through the expansion device quickly enough...causing the unit to pull a vacuum... replace the expansion tube which can be darn near impossible on many units.

...your problem. It has to be a certain length to operate correctly. That's why there's a coil of tubing. It is not too long. You'll have to replace the entire cap tube for that model of

...Tell him to remove the strainer, remove cap tube, blow out system with nitrogen, install new strainer/ filter drier, install new cap tube and charge, you should be as good as new. Hope this

...cap tube. You can then mic the butt end or cross reference to chart giving size of numbered drill bits. The length is also very important when sizing, cap tubes must be as close to exact length as ...

...cap located on the back of the *** behind the ice maker. What is thi part called and can I replace it? Sounds like the fill tube to the icemaker has frozen shut. The fill tube will need to be thawed ...

...refrigerator is located at the front base of the unit, in the grille, below the freezer door. There, you will see a round cap. Turn the cap counter-clockwise, until the handle is vertical.Then, pull ...