Saeco Magic De Luxe Espresso Machine "springs brew unit" Questions

...brew unit popped out? I had a problem getting the brew unit out but I follwed the advise that was given and it worked. However, I too had a small spring pop out when trying to remove the brew unit ...

...brew unit over to where you can see where the brew screen was. You will see 2 holes, 1 large and 1 small. Take a paper clip and straighten it. Turn the brew unit upside down and insert the paperclip ...

Brew unit Upon removing the brew unit to clean a piece has come off. It is is shaped like a square U. Approx 5 cm by 4.5 cm. there is a spring that was attached a spring however it too has come off. I

...brew unit. Holding the handle, the top left side is the brew head. There is an outlet pipe that is either to the front or back. 2 screws hold it to the top. Remove the 2 screws while holding the ...

brew unit (behind the door) Holding the handle, the top left side is the brew head. There is an outlet pipe that exits the backside towards the machine (looks like an "L" pipe). 2screws hold it to the

...brew unit. Holding the handle, the top left side is the brew head. There is an outlet pipe that exits the front side towards the door (looks like a long "L" pipe). 2screws hold it to the top. Remove ...

...brew unit also to make sure that it is not blocked. You model only has one boiler so if you're getting hot water from the steam wand it is possible that the problem is in the brew unit. I had water ...

...water but of course there is nothing to stop the dripping. Any thoughts please? Check the screen on the brew unit it is below the red o-ring and that might be clogged, and the grind might be too

...brew unit tablets a couple times. Cleaned all the screens. Problem persists Tak Your brew solenoid valve is the problem. It is supposed to open to deliver the pressurized water to the coffee, then ...