...working, but I am back to having to slam the door to get the light to go off and get it to work. What part(s) do I need to replace. Otherwise it works fine. a micro-switch or two there are two or ...
...slamming the door or by habitually opening the door while it's cooking without hitting the Stop pad first. If you or a friend decide to look into it, we have critical information on safety, ...
may 2013. Slamming the door, hard, worked. I am literally laughing so hard right now because Had the same problem. Slammed it pretty hard 15 times and lo and behold... We now have light that works!!!!
...door was slammed it is possible that the connection to the main board was disconnected. so since there is no display I recommend that you check the power to the processor board, check if the LT ...
...second's Most of the time this means that the door switches are not working, maybe the door is not shutting all the way. Try lifting the door while it is running. slam the door and try it. Good ...
Question about Microwave Ovens
...slamming door few times it works some times. model nn sn 7975 There will be a simple switch fitted somewhere on the door latch mechanism. This has broken so the door is not registering as open or ...
Sharp R-204CW microwave,won't start at all try to slam the door and try again. sometimes the micro switch at the door are getting sticky and would not latch correctly. if it work, open the housing and
We have to slam the microwave door to get it work.What coud be the problem? check the door switch .the part that sticks out of the door on the right side it hits the switch
Door came off. Can it be repaired? Door started malfunctioning about a year ago. It will not work unless door is slammed. Finally came off top hinge. Now it works fine but I need to reinstall door. ...
27 questions posted
Usually answered in minutes!
255 Questions
122 Questions
129 Questions
91 Questions
99 Questions
