...hood vent exhaust fan, and exterior "over range" light appear to work properly. When I shut the door and attempt to microwave or speedcook something the display time starts counting down but there is ...
Question about Kenmore Microwave Ovens
...Hood posts a F9 condition shortly after it starts. Chris [email protected] 925-980-8535 F9 almost always indicates a door switch fault. (In some models F9 with another letter behind it means ...
...Hood combination. Is this a fuse problem? This is usually caused by either a bad door switch, a loose door switch mount, or occasionally a problem on the control panel. Even though a door switch ...
hood / cooling fan is further "upstream" from the turntable and high voltage section). There should be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind
...hood vent exhaust fan. It is a normally-open device. When you jump across it, that turns on the exhaust fan. So it has nothing to do with this problem. This is usually caused by either a bad door ...
hood. the door won't close and the light stays on. I had to unplug it to turn off light. The rotating pyrex disc in it is properly set and is in no way preventing the door from closing. the latches (2
13 questions posted
Usually answered in minutes!
255 Questions
122 Questions
129 Questions
91 Questions
99 Questions