KitchenAid KUDC25CH Dishwasher "door not open" Questions

...open the door of mine and I figured out how to open it and repair the handle and wrote up all the steps (with lots of pictures) on my blog at: ...

door open.It apears the latch may have been broken and the door does not open. Where you grab the handle to open the door there is a a black plate which is loose. We have the same problem and I bought

...open the door to see if it opens easy. if this dose not cure it then the door catch has moved or got loose behind the door cover. with the electricty off and plug removed you migh try taking the ...

...door open at end of cycle. If dispenser door is open but not fallen down to the tub means most likely the water arm pressure is not good enough to get flush down to the tub. Door not open means ...

...open the door by unplugging machine, remove top cover and look down to door. YOu will see a cable running from door latch up towards the motor. This cable will need adjusting. Either that or the door ...

...does not open It is controlled by the circuit board, if is not open when you open the door then it could be the solenoid, or wire in the door or a bad circuit board. Can you open the door

...open the door see how much water is in it close the door wait 2 min open the door again if water went down the problem is arestrictioninthe drain valve (water should fill to touch the element in the ...

...open the door of the maytag dishwasher MDB4949SDH model. The screen says clean but the door won't open maytag dishwasher MDB4949SDH. The door will not open after the cleaning cycle has finished. The ...

...door open during operation , identify the mechanism that triggers the on button . In my dishwasher to check if it function properly , I keep a small wedge / strip near the handle / button which opens ...

door was open, but could not open properly during the cycle due to kitchen utensils in the way ... took a while to figure this our as it was intermitent (both the problem ... and us putting tall stuff