KitchenAid KHWS01PWH Global Horizontal Axis Washer "ge side making noise water" Questions

...hand side and making a loud bang bang bang noise 2-3 times during the cycle. It is a Ge front load washer. Leak could be a few things, Pump depending on what side its on /bangs, are they electrical

...GE's are pretty flimsy. I have run into a couple where during agitation the bottom of the motor housing would rub against the bottom panel making a terrible noise. You need to remove the front panel ...

GE Washing machine model WCSE 416OB is making a loud noise when spinning and not fully wringing the water out of the clothes--what could be the problem? I fyou have a well balaced load and it is not ...

side internally and the motor/pump sounded like it was humming. Obviously, it's out of warranty, any suggestions would be appreciated before I drop a couple hundred bucks on repair - GE wants $80 just

...GE washers is a errr errr errr noise while agitating especially. If the tub is full of water you can open the lid and move the tub back and forth and make it do this noise while the machine is not ...

noise level is much higher than with the samsung front load p801 that it replaces and the 20+ years old maytag top load that I had before). GE warranty technician came and said the pump is a bit noisy

...ge top load washer that's making a loud banging noise while agitating? The washer only starts banging while it's agitating or starting to spin. Once it gets going fast it stops banging. There is ...

noise. It's full of water and I need help! What in the world could it be? kinked hose or blockage in the water pump you defininatley have material in the water pump disconnect washer all together pull

...side. Don't worry, it's quite easy to spot. Turn the cap counterclockwise to remove. Make sure you have small container on hand as a few pints of water will drain out. Pull the filter basket out and ...

...noise on the final spin to clear out all of the water from the clothes. That is, I have eliminated drainage issues by cleaning the pump filter and fixing the hose that was not properly positioned in ...