back of your freezer. open the door and listen for the fan some work on the door switch make sure you depress the switch to check it. If the fan is not running more than likely you need a new fan. The
...door could be bad. The auger motor and the selector solenoid are located in a white box behind the ice bin. Pull out your ice bin and you will see a box with the drive sticking out and the selector ...
...door and release arm down. Observe the operation of the ice maker. Is after a minute or so the ejector arm does not rotate then it is likely the ice maker has failed internally. If the ejector turns ...
...door too often (then freezing again). The water down the back is from the ice cubes melting a little then re-freezing. Also, is the frige working OK? Does the compressor turn on and off normally? I ...
Question about Samsung Refrigerators
...door open the temperature raises and will stop ice maker. Also make sure water valve is open. Good luck Did you replace the ice maker with the exact model..and made sure the plug for the wires are ...
...back or how to remove any panels inside. The water drips from a panel under the icemaker, which works fine. Thanks. Poor cooling is often the result of a heavy frost build-up on the evaporator coils. ...
back on. Waited a few minuites, opened the freezer door and tardah....it was in its correct position. alright I reset the cogs, cycled it with the reset buttong and again it stuck in the dump position
Question about Whirlpool Refrigerators
...back of the freezer where the bucket came out of, the shifter in there needs to be down all the way also. With the freezer door open, depress the cube setting on the door, hold the light switch and ...
397 questions posted
Usually answered in minutes!
1,098 Questions
332 Questions
169 Questions
102 Questions
105 Questions