...you keep turning the tap eventually it does work. two taps ...one hot ....one cold on the tap the part that you turn is a cap pop that off and there is a screw that will just need tightening up ...
...shower cover to reveal the main valve/switch assembly (green in my case)On the green valve you can line up the bit that moves to select power settings and remove itUndo the two screws holding the ...
...shower handle off. The screw keeps spinning and the only way I can turn the water from hot to cold is with a phillips screwdriver. I bought a 3231 kit but how do I get the old off if it is stripped? ...
...shower is slowly but surely losing its ability to keep the temperature hot. I have to turn the temp up higher and higher to keep it comfortable and now it is all the way up and merely tepid. I know ...
...shower which runs off my combo boiler, normally this is fine but the thermastat keeps sticking and not letting any hot water through although the tap itself gets so hot you can't touch it, please can ...
...shower valve (turn 45 degrees ctr clockwise after removing retainer and pull) valve will not come out.no matter how hard i pull..what next (solution ???) Often time a Moen cartridge becomes very fond ...
...turning the jacking nut ( the "extra" nut) until it contacts the flat washer and 7/8" socket. Now, as you continue to tighten the jacking nut, it will pull the 1/2 bolt (threaded rod) away from the ...
water keeps leaking out of the shower part even when the switching device is push were it's supposed to be any ideas You have a bad O ring, and need to replace the cartridge, you will need to shut the
...shower head. Have turned off the water supply in my basement but over an hour later I still have water dripping out of the tap. Wondering what the problem is and how to fix it? Any advice would be ...
10 questions posted
Usually answered in minutes!
260 Questions
93 Questions
93 Questions
56 Questions
22 Questions