Moen & Posi-Temp Single Handle Shower Or Tub Valve  "valve hot cold reverse" Questions

...is the cold water inlet. valve body should have up..for shower..that would have hot on left..cold on right my moen single handle valve says "up" on 1 side. with this up the cold and hot are ...

...valve and the waters hot instead of cold when you turn it on, hot and cold are reversed...how do you change it around? You have to remove cartridge and rotate 180 degrees then re-install. Was it ...

...hot/cold valve... One of two things has happened. I'm assuming you only get hot water when you open the valve and that this is for a single handle control shower fixture. If so either this is the ...

hot water in to the mixing valve. Fixing this would probably mean cutting out the valve (then redoing the water lines with a new valve (possible option)). 2) The hot water line is losing too much heat

...valve has hot and cold water reversed. When the water is turned on, hot water comes out first. As the handle is turned further counter clockwise, it becomes colder until only cold as handle is turned ...

...hot water are reversed, you need to take valve back out and rotate 180 deg. and put back in: http://www.youtube.com/watch?v=J-SNBNijfQc Dave This is assuming you have hot water elsewhere in the house ...

...valve? We have replaced the hot and cold seats as well as the cartridge (mixing valve). When all parts are removed, we have good hot and cold water flowing through but after installing all parts, the ...

...hot the water gets by controlling how far the handle turns), then the metal cover over the center piece of the valve. Once these are out of the way, there is a small metal clip that you can see that ...

...goes in first. The smaller of the two is more ring like with a sqare on top, the more the sqare is rotated to the left, the more the handle can turn to the hot side of valve. I hope that makes

...hot I was putting in new tile in the shower, water had been drained from the system for about a week ,installed new trim kit and it's like the valve has reversed itself,put old trim back on and it's ...