Moen & Posi-Temp Single Handle Shower Or Tub Valve  "tub valve" Questions

...at 42 to 44 inches and the shower arm at 74-78. You want it I usually rough the tub and shower valve spout at 4" above the tub rim, shower valve 10" above the spout. This is for tub and shower

...valve tub/shower faucet. When I try to turn on just the tub spout, the shower comes on as well. What could be causing this? most likely problem is to much pressure in water lines if u have shut off ...

...Only two possibilities here the diverter tub spout is not open all the way to let water to the tub only or the shower valve is installed up-side-down. ...

Shower mixing valve shower comes on wit tub If there is a button on your tub spout, replace the tub spout. If there is a button on the valve itself, replace that.

...tub/shower valve handle and decorative plate first. Behind the decorative plate there should be a shut off valve on each side of your valve. They will probably be slots to accept a big screwdriver. ...

valve is on the tub. If you pull up on a knob on the water spout for the tub, then it's not likely the leak will ever stop completely. If the diverter valve is in the wall then a repair kit can be had

...valve(s) at which point resealing would be in order. You can get leakage also if the caulking around the tub where the tub meets the wall has gone south. Stamped out steel tubs (common in rental ...

...tub valve runs only very cold or very hot. whats wrong? Your Moen valve is equiped with an anti-scald device (as part of the valve cartridge) which prevents someone from getting scalded by hot water ...

valve to tub spout. But not the Shower head outlet, since the shower is part of the tub spout system? But you can verify at the store you purchased from, or the MFG customer service. It would help MFG

...air into the pipe at tub spout to blow rust up and out of valve body and into tub. Could probably do the same with a water hose. This fixed mine and it is better than it has been the entire last