Moen & Posi-Temp Single Handle Shower Or Tub Valve  "set screw access" Questions

...set screw to tighten it . How to tighten the handle to the faucet stem? Take handle off and check out the inside to make sure it not striped out and on the top of the handle it may have a plastic cap ...

...is a set screw on the base of each handle, on the backside, which needs to be loosened with an allen wrench (hex-head) lossen the set screw and remove handle. Please rate this answer for me. Thank ...

...set screw. On the underside of the handle, you may see or feel a small, rubber plug button. I typically use the tip of my razor knife to gently remove the plug button. Once removed, you should gain ...

...out the little plastic hot and cold water symbol from the handle and you should find a set screw in which you can remove to get the handle of for access to the main insert and seal...Hope this

...to me the only way If it is a single handle there should be an access hole to the under side of the handle that will allow access to a allen style set screw, loosen it and the handle can be

...water, locate and loosen handle set screw, remove cylindrical cover, and remove retaining nut to access stem. Take e stem with you to a home store or plumbing supply house for accurate

...set screw on the handle loosen and remove handle, remove locking ring (a tool to do this comes with the replacement kit that you can buy from hardware store) remove the ball. You now have access to ...

...locating the set screw, remove the cylindrical beauty cover, and unthread the retaining nut to access the valve stem. Take it to a plumbing supply house or home store to make certain of the

how to remove the cover plate from a triton t80 shower Remove handle by locating set screw. Escutcheon (cover plate ) screws are now accessible to be removed.

set to cold, onley when centered. whats the problem? Check the valve body to make sure it is right side up. there will be a marking on the valve that tells witch is to go to the tub spout and witch to