Moen & One Handle Tub & Shower Faucet  "sleeve" Questions

& One Handle Tub & Shower Faucet : having a hard time removing sleeve so that i can a... Having a hard time removing sleeve so that i can access valve If it's the one I'm thinking, you unscrew that ...

...push it in, and turn the body of the cartridge, and it should start to ride up on higher brass sleeve and start to pull itself out. If you look at vertical part of cartridge, it is sitting back ...

Can't get both hot water running at the same time. Delta Shower faucet The spool and sleeve, the part of the Scald-Guard pressure balance valve that blends the hot and cold water, is not working ...

...are hot anti-scold control needs to be adjusted.turn off the water,remove the handle,and chrome sleeve .anti-scold control is located under the handle ,needs to be turned to the ...

...set-screw from side or bottom of handle, or phillips screw under cap on end of handle), pull off sleeve that's behind handle, unscrew nut that holds cartridge (strap wrench works great) and pull ...

How do you remove the temperature knob and cover from a delta shower faucet, model 1824 (Monitor 18 series)? ...

Can't get the cartridge out of moen single knob shower faucet. Took off handle, sleeve and brass clip but could not pull out cartridge. Does it pull out screw out or what? You have a common problem ...

. Step 1: Call Delta and have them send you replacement parts before you follow the next step (Trim sleeve, cartridge, handle) Step 2: HACKSAW just outside the handle, right through until it snaps off

How do you get the sleeve and bonnet off the faucet? HOME CLINIC For Tighter Shower Heads and Faucets

...is supposed to extract the cartridge, it only manages to pull out the inner stem, leaving the outer sleeve of the cartridge stuck inside. I know that people have used a 12mm tap to thread the ...