hot then lower [adjust] the temp of your hot water heater -if need to adjust the shower you can adjust the mixing by removing the handle and on the valve stem are the adjusting clips the red [hot] and
...is in the mixing valve(shower handle guts) Some mixing valves have an adjustment under the handle to let more hot water to mix with the cold. If this is not the case then it is the mixing
...hot water from my shower head. I have plenty of hot water in my bathroom and kitchen sink. What can I do to remedy the problem? the problem is the hot/cold mix is set wrong --- remove the water ...
...more hot water? Pull apart the front of the valve and there is a limiter that is set to limit hte hot water, you need to adjust that limiter. I find many valves are shipped with teh setting too
...adjust the hot water setting of a Symmons pressure balancing mixing valve? To set the shower valve handle limit stop, remove the screw holding on to the handle and remove the handle. Remove the round ...
...pressure Is there a water saving feature/washer ?Was there good pressure before ?Is there an adjustment at the control valve for how much hot/cold water is being balanced ?Any debris stuck in valve
...hot water in our shower. The water in the sink is very hot, but the water in the shower gets a little bit hotter than warm. I have read that on some fixtures there is a setting inside the knob that ...
...adjust shower mixer temperature? I've adjusted the hot valve all the way in (almost off) and the cold is all the way out (completely on) but I still can't get the shower to be cold. I've also turned ...
...though there is plenty of hot water. Can not locate screw, etc to adjust the mixing valve. Their is a mixer valve if it is a one handle unit which is built in. It may be one half turn out of
344 questions posted
Usually answered in minutes!
93 Questions
93 Questions
56 Questions
22 Questions
21 Questions