Water Pik Shower Head  "tub faucets spray" Questions

I'm having trouble removing an old tub spout you could try some wd40 releasing spray and a decent tap spanner

...spray divertor located on the post of the faucet. For a basic Moen Kitch faucet you must remove the handle. With older faucets simply pull up to slide off the hdle cap, unscrew the center screw that ...

Moen single shower handle won't come off even after set screw is removed I am trying to remove the handle and face plate off of a Moen single handle shower faucet. I have removed the set screw ...

...TUB FAUCET THAT IS LEAKING. I KNOW HOW TO FIX THE LEAK BUT THE HANDLE WILL NOT COME OFF. I HAVE UNSCREWED AND TAKEN OUT THE HEX SCREW THAT HOLDS THE HANDLE ON. I HAVE PULLED, WIGGLED TO TRY AND GET ...

replace delta single handle shower cylinder leaky faucet....have removed plate, handle, retaining nut and bonnet...how to remove cap assembly with stem? Just pull real hard with pliers? Yes, I believe

...spray. Seems that a washer is needed but note came with my "eco-head" shower showerhead. There should bea rubber gasket/washer that goes between threads on shower arm and inside of shower ...

The faucet is dripping. I want to replace the washers. The problem is how do I remove the handle? There are no set screws on the handle. I don't want to pry if off and do damage. Help! This is ...

...tub spout spray orangey water when first turned on The only cause for this is iron pipe being used somewhere in the system. This is commonly found between the drop eared 90 in the wall and the tub ...

I just installed a series 13/14 single valve tub/shower faucet. When I try to turn on just the tub spout, the shower comes on as well. What could be causing this? most likely problem is to much ...

We have installed a new tub faucet. When the lever is pulled to allow the shower to work, the faucet sprays water. tighten valve stem seal loose remove handle and cover the nut on shaft tighten a ...