...flapper chain using a paperclip. I adjusted the paperclip to go through the next solid link in the flapper chain and tied the other part of the paperclip to the flapper. After some adjusting, this ...
...flapper to handle chain/rubber connection flapper not opening all the way I have this eljer toilet one piece that had this problem after i changed the fill valve. i changed the flapper with a red one ...
flapper, then the chain would connect to the flush arm at the top and to the little fin on the flapper at the bottom. There should be a little ring connected to the fin. Sometimes the little ring will
...tube. Install your flapper, hook up the chain and turn the water back on. The chain should have just a little slack in it. Best regards, --W/D-- please feel free to rate this
...flapper stays up and will not fall back down so toliet keeps trying to fill adjust the chain that connects the flap to the handle give it some slack but not so much as to get chain laying under the ...
...chain can get caught between the flapper valve and the drain hole, the flapper valve is pliable so it tries to seal around the obstruction but can't always do it. Make sure there is obstruction, that ...
...flapper chain and remove the flapper. The old assembly does indeed rotate in either direction for removal. I used a counterclockwise motion. (it was a tough turn, don't break the bottom of the bowl ...
...chain on the flapper need's some slack, you just have to move it a little till it get's adjusted right. Water level low in the tank will affect the flapper also. I hope this will be of some help for ...
...chain to rubber in tank. The little chain is not connected to the red rubber in tank. We seem ro be missing connector part. Help! Replace corky flapper, can get one at home depot for a few ...
54 questions posted
Usually answered in minutes!
80 Questions
45 Questions
21 Questions
