I recently installed new fluidmaster fill valve. Now when i try and turn valve from wall on, the water flow from valve shuts off before i can get valve all the way on. Even if i turn it on slow it ...
...in the toilet tank. Assuming this is not a pressure-assisted toilet-----First understand the three valves are: 1. The shutoff valve - on the supply line coming into the toilet tank. 2. The fill
...toilet is a flexible line then bend it so that you can direct water to small container. Slowly turn valve on to see what flow rate is at that point. If flow rate is not good then I would shut water ...
...the number, where is it located? The reason for toilets running is one of 2 problems. 1)The flush valve (or flapper) is not closing/sealing properly. 2)The fill valve is not closing ...
the water in the bowl keep runing after the tank is full. fill valve not shutting off water running over overflow tube set or replace fill valve flapper valve leaking replace flapper valve cracked and
1.6 toilet will not fill Make sure the water valve to the toilet is actually letting water into the fill valve. Turn off valve, remove from fill valve, run water into a pan to see pressure and confirm
...I flush thenwater fills to the fill line and slowly keeps on dripping over the top of the flush valve tube. I would ckeck to see where water fill line is inside toilet tank and then adjust flush ...
The shut off valve for the water supply to the toilet failed. I attempted to shut it off because the flush valve assembly in the tank failed. The water shut off to the toilet that is in the basement ...
...not sure of the model number...it's the jacuzzi toilet for handicapped. You need to replace tank valve. See photo of the product: http://salestores.com/fluidmas.html Buy this product at hardware ...
17 questions posted
Usually answered in minutes!
80 Questions
45 Questions
41 Questions
21 Questions