KitchenAid Architect Series KBHC109JSS Electric Single Oven "oven hot 2 hours turned" Questions

...oven doesn't seem to cool down and turn off fast enought. Last night I baked a casserole for an hour, I hit cancel to turn it off. The touch screen was dark, so it looked like it was off, yet for 2 ...

Oven staying hot a long time after it was turned off I cooked something at 8:30 and it burned, even though it was only in for five minutes on 350. It seemed that the oven was on a much higher ...

...oven broke down or the sensor,please check them both, because one of them donot send signal to the electrical board to shuts the fan down, I can tell that,because if you let a very hot plate even on ...

...disappears, gets too hot, acts like broiling after preheating. What part do I need? Turned off breaker for 2 hours to reset but it did the same thing possible transformer or control board ...

...oven gets So Hot the it weakens the insulation on the wires. Eventually you will short out the life of the stove. Next time... Heat to 250F. turn off oven. Let it cool a little and then spray... the ...

...oven could help. Is there someone that knows a solution to it? Thanks! Error E5121, E5122 or E5123: Is a problem with the pump or the water hose and indicate that either the pump or the water hose is ...

...2 weeks old & "hot Surface" light takes hours to turn off - sometimes overnight. hello your statement say 2 week old you did not need any service on this what you are to do is to re-tune it back ...

...oven didn't get hot and the door didn't lock. However, the oven is not operational. I turned the breakers off and on 3 times and waited for a couple of minutes, but nothing This suggests pressing the ...

oven will blow hot air for up to a half hour after it has been turned off. This seems unusually long- what is the expected time of cooling off? Hi, That depends on the ambient temperature in the room.

...oven is hot wait several hours until the oven is cool to the touch. 2.) If your oven is not hot, wait 10 minutes. 3.) Turn the breaker power on to the range. What we are trying to do is reboot your ...