Clock on Whirlpool Stove When I turn on the timer for the clock, the stove comes on - don't need stove - only need to use eyes on top of stove Check to see if the oven is set to timed bake.
TURN ON. STOVE TOP WORKS. CLOCK RUNS, AND YOU CAN SET IT AND THE TIMER, BUT THE OVEN LIGHT AND THE STOVE ITSELF WILL NOT WORK. HELP???!!! you have an electric problem that it can be from lightening or
Question about Frigidaire Kitchen Ranges
...clock or oven temperature contols and so can not turn on oven. Is there a control panel that went out? one of the stoves does not work. What could be the problem and how to fix it? Thanks Frigidaire ...
...stove but we can not get the top burners to heat up and the stove will not work? Clock is on lights turn on when you turn knobs. sound as if you only have 120 volts going to the range check the ...
Question about Maytag Kitchen Ranges
...Stove / Oven Fault Codes Failure Code Fault Code Description Solution F0 Function key stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F1 Defective touch pad or ...
...and flip the corresponding breaker on and off on the breaker box. wait 30 seconds and than turn everything back on. if the problem returns after power-up, replace the clock. Regards
Question about Frigidaire Kitchen Ranges
...stove is the clock??? I had this problem the other day with a customer stove. It turned out his outlet had a bad connection and the prongs were fried. His stove was getting less than 120 volts where ...
Question about Whirlpool Kitchen Ranges
...turn on. I have flipped the breakers and unplug it for an hour. Is there any way to reset the stove. PF = Power Failure. Sounds like you have a bad electrical connection. With your breaker off, check ...
...turn on the stove top the clock lights up but nothing else. When I turn on the stove top it makes a short buzz like sound, clock works because its only 110 volts.all else is 220.as a repair man the ...
...clock (electronic range control or ERC). Unplug the touch pad ribbon connector from the ERC. This will be a flat wire apx. 1 1/2" to 2" wide. Make sure everything is clear and will not short out when ...
284 questions posted
Usually answered in minutes!
269 Questions
105 Questions
116 Questions
75 Questions
64 Questions