KitchenAid KESC307 Electric Kitchen Range "burner under glass work" Questions

...burner itself is bad. Most tops have a couple screws under the glass panel the will allow you to open up the top and install a new burner element. these elements are very fragile so be careful ...

burner to see if it is connected? there are 3 screws under the front of the top with the oven door open actually there are 6 screws but only 3 you need to remove to raise the glass top up!! to service

burner? Yes you can, at least I removed mine on a Kenmore. Be very careful as the burners are very delicate and even more so after they have aged.Look under the edge at the front for 3 screws. The top

...burner - WB30T10133 You can view these parts at searspartsdirect.com under the "Cooktop" heading. You may find the parts cheaper at these other websites, by searching for them using the part numbers ...

...under the back panel of the stove). Then, turn on each electric burner to see if it turns RED hot. If not, wait till everything COOLS and reseat each heating elememt and retest those that failed. If ...

...glass screw in fuses hidden below the controls and above the hobs. You undo the switch bezel for the oven light and the switch bezel for the rotisserie and pull the panel forward exposing 8 fuses. If ...

...top and check the burner element to see if it went bad. To remove the top, unplug it, open the door. Look for screws under the lip where the door closes, check the back for screws, lift the top

Model 790.9642340C SN VF70272088 Sounds like you've got a loose connection somewhere (probably under the glass cooktop. You should probably call a Sears repairman to take it apart and check it all out

under the oven, but the oven doesn't work and we have to light the burners with a match. AMANA – Range/Stove/Oven Fault Codes Glass link Electronic Range Control (ERC) F7=Shorted touch panel

...BURNER IS NOT COMING ON SO i HAVE TO REMOVE THE LID TO SEE THE PROBLEM. There are usually screws under the front that will allow you to open the top. Make sure you have the power off. If the screws ...