KitchenAid KERA205P Electric Kitchen Range "temp alarm" Questions

...temp and then this alarm goes off. alarm code F2 thank you f-2 is a faulty temp sensor. replace the oven temp sensor to solve problem onestewartfn You thank chris72 & rate him "inappropriate"???!!! ...

temp runaway alarm; sounds alarm and resets control to non-cook mode when bake/broil/clean temp exceeds programmed limits. Usually means a stuck relay. Electric @ 525F (bake), 640F(broil), 900F(clean)

to slow roast ribs then in about an hour the unit started beeping,flashing F1, on an extremely high temperature, ribs started smoking, fire alarms went off. When we shut off circuit breaker, unplugged

...my oven and the F2 alarm keeps sounding every minutes. What is wrong? First, check the oven sensor and see if it reads 1080 ohms @ 77 degrees F or close to that at room temp. Post back your

...temp, turn to bake and continue. 5 minutes later, the alarm sounds again and won't stop unless I turn off the oven and let it cool down again. This sounds like a bad temperature sensor. It's showing ...

gas oven alarming and flashing F8 my magic chef gas oven keeps alarming and flashes F8. Tried to stop it , but only thing that does is the off button. when I turn it on again, it does it again when it

...alarm that becomes more and more often as the time goes by EO and F2 means you have a shorted keypad. Or the oven temp is too high. The cheapest route to go is to replace the oven temp sensor first. ...

...alarm indicates proper temp reached in 8 minutes. TEmp drops too low ans takes too long to return to 350. Oven sensor replaced by a service technician - did not solve problem. He did not think it was ...

...my sharp atomic clock. Put in new batteries and set time and date on back of clock but the outside temp is not registering? I put in new batteries. Hit reset button and set time and date after ...

F2 alarms keeps coming on. F2 is a runaway temp code relay or touch pad are stuck... need to replace touch pad and relay board... I have heard that some cleaners will get into touchpad and cause this ...