...went blank after self-clean cycle on gas range Hi, We have a KitchenAid KGSA906 gas range. We used the self-clean cycle for the first time and the control panel went blank during the self-clean cycle ...
Question about KitchenAid Kitchen Ranges
clean cycle, display panel went black and oven door stayed locked. After the self-clean cycle on my gaz stove model KGRA806, the control panel went black and the oven door stayed lock. HELP!!! Happens
Question about Kitchen Ranges
clean cycle. I've unplugged it and plugged it back in after a few minutes and it remains in the same status. Did the control panel get fried when the oven went through the self-cleaning cycle? If not,
Question about Whirlpool Kitchen Ranges
...clean cycle on our accubake wall oven. A couple of days later we went to preheat the oven and the timer counted down and signal the ready chime yet the oven was not heated. Tried several times with ...
...went wrong) in Summner 2002. For the past 4 and a half years,it was working perfectly until last Christmas when I noticed that sometimes when I turn on the oven, it does not heat up. So instead of ...
went to self-clean it and stopped the process when flames started (left over cookie dough). Now the latch won't fully disengage. I tried cutting and restoring the power, and ran another Cleaning cycle
...went back, pushed the start clean button, the light began to blink. I heard a click and the door unlocked. Philadelphia Foreclosure Protection Service Solutions I had the same problemI looked at the ...
went through the complete cycle of 3 hours. I unlocked the door and was able to open the oven door no problem. Later on I went to use the oven, pushed the bake button and the lock light would flash. I
cycle, NO power outage but panel went black and door remains locked even after cooling. Circuit breaker not the problem. Top elements work. We have a Kitcheaid gas stove and have had 3 new thermostats
...went to over 500 degrees to clean the oven. Let it cool overnight and the door should release. Do not try and force it-you will damage the door locking. This is a safety feature to prevent harm ...
14 questions posted
Usually answered in minutes!
269 Questions
192 Questions
105 Questions
116 Questions
75 Questions