...aid stove gas stove top.had a pro longed power outage(24 hrs) will not ignite auto matically any more must use matches.any suggestions? check the outlet, perhaps it's its hokked to a GFI outlet ...
...Aid Gas Stove Top (Model KGCK366VSS). The top works great, actually too great. The burners when turned all the way down produce too much heat, making it impossible to simmer anything. Is there a way ...
...aid glass stove top stove. Had to replace wiring and broke to glass when putting it back in. How do i replace it now with out breaking the new one? The following link will give you some advice on how ...
Question about Maytag Kitchen Ranges
...Top Stove. We are having some trouble with a fairly new (bought Oct 2008) Inglis Glass Top Stove. Our stainless steel pot leaves rings on the stove, and some cooking splatters have been so far, been ...
...Large cooktop element on smooth top kitchen aid range burns high at all settings. How to lift stove top to replace & where to purchase replacement part? The problem is in the switch not the
...stove top just clicks for several minutes trying to ignite. It usaually starts off with a small flame even on high and as it warms up the flame gets to where it should be. After it runs for a few ...
...stove top. Carefully note the position of the old module and label the wires so you can put them in the new module correctly. There should be 2 or 3 screws that are holding the old igniter module in ...
...stove technician to service you kitchen Aid range. You have low gas flow on one of the burner. The manual gas control valve behind the knob needs to removed and cleaned. If you have one cleaned then ...
Question about Kitchen Ranges
...aid oven/stove, branch new Clean the stove so all food residue is removed. Take a single blade razor blade and very slowly scrape the edges of the melted plastic. Blade should be held at a low angle, ...
Question about KitchenAid Kitchen Ranges
...Aid stove top, KGCS1340P. Apparently the "public-spirited" <glyph of deep sarcasm> manufacturer stopped making them because the stove is ten years old. There must be a source for used parts -- ...
51 questions posted
Usually answered in minutes!
269 Questions
192 Questions
105 Questions
116 Questions
75 Questions
