Sebo X4 Bagged Upright Vacuum "check brushes light" Questions

...brushes still spin. I checked the roller and the latches are in the right position. Not sure what this means. You are referring to the green led light on the front of the machine that tells you the ...

...somewhere but how to proceed? Hi I have a vax mach air light.the brushes wont turn but the green light is on. I have checked eveything .The little button on side tube no blocks .Checked all

check brush lite stays on after brushes have been checked Make sure that the filter is dry and properly installed. Usually that's what causes the "check brush" light.

...reset button does not correct the problem, the belt is ok. If the motor works and the brush dosen't turn then I would check the belt and as far as the light goes it might just be blown hope this ...

...light won't turn off and as soon as it came on, my brush roll won't work Check the belt and the end bearings are free by hand. (electric off plug out) if not free remove plate to access roller/brush, ...

brush light on brush not moving Check the belt that turns the brush, either it slipped or needs replacement. You have to unscrew the bottom to take the brush roll out.

...near the belt and it still starts and stops as if it is skipping of getting stuck on somthing. Check the brush end bearings for debris build-up and sticking bearings--remove the brush assembly, ...

...Remove the brush and clean the bearings and end shafts. Oil them lightly with 3-1 oil or similar. Check the condition of the drive belt and replace it if badly worn or broken. Check the rotation of ...

...light on. Remove the brush roll and check for damage behind the green led inside the case, also check for the magnet on the brush roll, ensure it is not missing and the brush roll is in the correct ...

...flashes then check brush light comes on and stops the cleaner. I've tried new belt, new brush and new bag & have checked for blockages. Any idea? motor getting hot,,take apart and clean it with ...