Sebo X4 Bagged Upright Vacuum "brush light" Questions

...light replaced brush indicator light on kirby g4 and light still wont come on If the light is not glowing it means the brush roll is not spinning. The belt may be stretched and need replaced. The ...

...light on. Remove the brush roll and check for damage behind the green led inside the case, also check for the magnet on the brush roll, ensure it is not missing and the brush roll is in the correct ...

...light on. Remove the brush roll and check for damage behind the green led inside the case, also check for the magnet on the brush roll, ensure it is not missing and the brush roll is in the correct ...

up to spin at the spot where the green light is. If the brush is not installed properly or the wrong brush roll is installed the magnet will not line up with the green light. See comment section above

light roller brush indicator comes on after a few seconds and brush wont spin all filters clean and no debris round brush on my shark hoover model nv680ukt40 I have cleaned all filters suction is fine

brush indicator light indicates that the brush roll has stopped turning, usually because an object has become stuck in the brush roll. When that happens you should turn the machine off (unplug it also

Brushes not spinning.... Hi, i have the roomba 4210 discovery. Both brushes stopped working. Everything works fine except for the brushes. I called roomba technical support and they said i need a new ...

...won't run. where do i power light on but motor won't run. where do i start? the motor carbon brushes need replacing which is a most difficult job to get the cleaner disassembled. Brushes are ...

my windsor vacuum brush light keeps coming on You may try a new brush. With these models the light will continuously run to signal it needs the brush replaced.

...brush light which should be green is off. The brush won't come down anymore - light is off (not green). Should I replace the brush? If its a X4 / X5, it may be time to replace the Roller Brush. The ...