...button won't work. Cuisinart Food Processors ? Motor Test First, do a motor test by removing the work bowl completely and using a pen to press in the grey button on top of the base (with the food ...
button so it was tall enough to be reached by the actuator. The fault can be with the power cord, the switch the motor brushes or the motor winding.You need to open and check from the power cord
button with a pen, the motor worked!!!! Then I realized I was putting the work bowl backwards!!! THANK YOU!!!! Yup. The front little button has to be depressed by the bowl apparatus itself. If the top
...button but I can't remember where Cuisinart Food Processors ? Motor Test First, do a motor test by removing the work bowl completely and using a pen to press in the grey button on top of the base ...
button. Motor will start if you have followed assembly instructions. To turn motor off, press the Food Processor button again or the Off button. For on/off operation, called pulse-chopping or pulsing,
...it's locked in. Pressing the top where the food chute locks, will activate this button and allow you to run it. I had this problem out of the box, took me a while to figure it out. It works fine
Question about KitchenAid Food Processors
...button switch in with something non metallic. If the motor goes then fault will be with the mechanisms that activate that switch in either the bowl or the lid. The lids are slightly more likely to be ...
...motor test by removing the work bowl completely and using a pen to press in the grey button on top of the base (with the food processor turned on of course), toward the back. If the processor spins, ...
Question about KitchenAid Food Processors
...motor on and use something plastic to push in the little white button in that is just above the button control panel and normally hidden by the bowl base. If it goes then the problem will be either ...
19 questions posted
Usually answered in minutes!
39 Questions
22 Questions
25 Questions
13 Questions