Malibu ML600TW - Low Voltage Power Pack - 600 Watt - With Timer and Ground "clock timer work" Questions

...timer, it takes 125V clock motor. http://www.grainger.com/Grainger/INTERMATIC-Time-Clock-Motor-1PNK1?Pid=search B) This is new installation? and clock motor only worked when override was ON, so you ...

...Clock-Motor-1PNK1?Pid=search Timer mechanism releases from box with metal spring located inside top of box. Clock motor is attached with 2 star screws. Notice clock motor has plastic gears, but timer ...

...timer and clock motor is located on back. Motor has numbers printed on it that identify specific clock motor. Motor is removable with small star screwdriver bit. Clock motor has white wires that ...

...clock motor.If the gears strip out, then timer can run backwards.Some timers have replaceable clock motors, such as Intermatic and Tork box timers, and pool ...

timer has 4 timers plus a clock. I lost the instructions so I can't figure out how to set the clock. If it's the same as ours (clock button top left, clear bottom left): press and hold clock until the

...clock: Taco timer uses the FM1 timer module. Voltage and timer information appear on back of timer. Open following links to identify timer and model number: ...

...timer comes stock with WG1570 120-480 volt clock motor. Clock motor typically connects to terminals A and 1. Hot black wire connects to terminal 1. Neutral white connects to terminal A. Load wires: ...

clock, should be WG1573 for 240V timer Google search for 'Intermatic WG1573' For example Grainger sells that clock motor as 1PNK2 (plus they sell extra trippers which are designed to wear down): http:

...clock. If the timer controls the sprinkler or lights, then the clock motor is probably 120V, with 120V clock motor Grainger sells 120 and 240 clocks for the T100 series timer ...

timer clock not working Problem is not clear. If this is new installation, then wiring is probably wrong. Voltage and model number of timer is not known for certain. You posted under T10404R that has ...