Wiring of the 2-5-10-15 timer to a jucuzee bath tub it has three wires black blue green. Thanks. Terry. First thing to consider is size of Load. Leviton countdown-timer Load rating is 1800 Watt, ...
...connect it in an old house with only 2 wires in the box (no separate ground wire)? I wrote a page on Honeywell Aube timers with manuals for each model number ...
Question about Hardware & Accessories
...Connect wires to terminals a and b ... make sure no insulation is under screw plate. 44 watt power pack will operate 44 watts of low-voltage lights (12Volt). If 300 watts of lights are installed on ...
Question about Hardware & Accessories
...watt goes dim why is that You change circuit from parallel to series.. In parallel (with neutral connected) each bulb receives full voltage, and then each bulb runs at watt rating. In series (with ...
Question about Intermatic Hardware & Accessories
...landscape lighting. There are three sets of terminals (300 watts each), but each set has three connections labeled A, B, and C. Why three connections when there are only two wires to connect? im ...
Question about Kichler Hardware & Accessories
wiring up a transformer. 15PR200 SS 1) Copy following link for available resources for Kichler 15PR200 pro-series 200 watt transformer with selectable voltage output: http://waterheatertimer.org/Woods
watt with 3 connectors on the back. I'm assuming that you have a cord that has 2 leads, similar to a black extension cord. Connect one lead to the farthest one on the left screw, skip the middle screw
...wiring to 600 watts. With the 600 watt ML series, there are two sets of a-b-c terminals. C terminals are used with photo eye. Connect 300 watts of bulbs to one set a-b terminals, connect 300 watts to ...
...With the ML600, there are usually two sets ABC terminals. Connect wires to AB terminals unless using photo eye. Connect 300 watts to each set of AB
...for that model from Intermatic. However, I can tell you that the black wire on the photo cell connects to the incoming hot wire, (usually black). The red wire on the photo cell connects to the ...
88 questions posted
Usually answered in minutes!