Weatherproof WT-12 - Single Circuit Transformer - Landscape Lighting "run low voltage lines" Questions

I have (7) 20W bulbs on a newly wired line running on a brand new 200W Malibu transformer, worked fine for 2 days and now it's tripping the reset button - Any suggestions ?? I have (7) 20W bulbs ...

...standard wire such as even the largest 12ga low voltage wire. You'd probably have to run something like 6ga which would be a cost-prohibitive joke. Just run them separately with multiple runs of

run extension cord from another outlet. Connect wires to terminals a and b ... make sure no insulation is under screw plate. 44 watt power pack will operate 44 watts of low-voltage lights (12Volt). If

...Also, swap the "loop" connections to the tranformer. If the problem still persists replace the wire run. Sometimes wire gets damaged internally and visual inspection will not reveal that. If the ...

I've got an Intermatic T104 (240v). It's been running fine for years.\r\n\r\nThe other morning, I noticed the pump not running. I checked the timer. \r\n The timer wheel was jammed against the Off ...

...watts to other set of a-b terminals. I'm not sure what is inside the power pack. However if you run less than or more than 600 watts or let your bulbs burn out for any length of time, the power ...

...run with Intermatic ML12210 Malibu 100-Foot 12/2-Guage Low Voltage Cable. Make sure to get 12 gauge wire. There are a few things going on here. First, the transformer is being overloaded. I suspect ...

...LOW and Com cable ports? One run is ~50' with between 50-100 watts. the other run is ~40' with between 40-70 watts. Each run is in opposite directions. Using the loop method is not feasible. Yes, It ...

...low voltage outdoor light system. Plugged into 120 volts ac outside in a sheltered area. Both kinds of timers consistently fail in the ON position. A timer plugged 2 feet away inside a greenhouse has ...