...attachment should just fall off unless you are full of dried "Gunk" then you have to get the shaft and attachment warm to hot and wet to soften the "Gunk" so that the attachment comes loose. I hope ...
attachments fall off Bamix hand mixer. The blades (attachments) keep falling off for no apparent reason Excerpt from: http://www.bamix-usa.com/ It can happen that the attachments fall off the shaft as
...attachment won't fit unless I take off the metal cap. I've tried everything but it looks like there's no way of getting it off. Surely there must be a way otherwise the ice cream maker attachment ...
...attachment without the whole gearhead rotating. Anyway to lock the gearhead? As far as locking the gearhead, no, at least not without taking the planetary off of the mixer shaft. You would have to ...
...attachment off. I used to be able to pull up and twist and it would easily come off? Seems stuck. make sure attachment is turned full counter clockwise to release point give a good tug if doesnt work ...
or pulled off? If so, what then is the notch at the top of the attachment shaft for? Thanks They get gently wiggled off. The notch is so that they click in and don't fall off while they are performing
Question about KitchenAid Food Mixers
Can I re-attach the speed/hall sensor magnet to a KitchenAid mixer motor shaft? I had the well documented issue of the mixer speeding up really fast and then turning off. I took apart the mixer to ...
...in the mixer. If the attachment is not pushed far enough into the mixer housing and screw is not locked down the attachment will spin. It is possable that ihe pin on the attachmen t is sheared
108 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: