...screws on either side of the head of the unit, each above the locking mechanism on one side and the speed control knob on the other side. When I removed these, I noticed that they had copper coils ...
metal rod sticking out of the side of the mixer On the right hand side of the mixer base there is a hole that goes right through. There is a metal rod sticking out of this which I noticed is sticking ...
...bar that the head hinges on has come out. It is located on the base and should be flush with the side of the mixer on both sides. Just knock it back into position and then turn the mixer over to ...
...screws that hold the cover on. That side will lift up, but the front side wants to stay in place. I don't want to force it and snap the cover. Is there a trick to removing the cover? Thank you, Rob ...
Question about KitchenAid Food Mixers
screws a half turn) if it machine does not start then there is a strong possibility that it is the bottom screw, the bottom screw can and sometimes does get turned in or out due to the pressure caused
Question about KitchenAid Food Mixers
Remove all screws from bottom side of gearcase, 5 around planetaty, 2 in the middle and 2 at the back. You can now seaparate the gearcases to get to the speed control lever which is held on by 1 screw
...Lately, when mixing dough for bread or cookies, the motor head of the machine wobbles a bit from side to side. In addition the pin on the side starts to work its way loose and I have to tap it
...screws (two on each side) holding on the top cover for the mixer. Remove the four screws and then lift off the top cover and you'll see the motor, circuit board and gear box that operate the
...at least answer your question partly. Maybe you can get on from there. When you look at the front side of the mixer(the side opposite to the cable), there's a slim oval lid with rounded ends. Push
...aid 5KSM150PS pin fallen out on the stand part of my kitchen aid a metal pin has come out of one side of the stand. It seems to be there to hold the motor head into the correct place. Can you ...
349 questions posted
Usually answered in minutes!
493 Questions
357 Questions
205 Questions
183 Questions
89 Questions